REX snow plow, with a working width 1.5 m or 1.2 m is designed to work with different types of micro-tractors. Its construction is modular: plow with hydraulic lifting and turning system is an independent module attached to a particular type of tractor with a suitable bracket. The brackets are produced in versions adapted to different tractors. When ordering, is required to specify a type of the tractor with which the plow has to work.
- There are two external hydraulic outputs required to steer the plow pulse-controlled. In case of lack of the two outputs, we can provide with the installation of an additional hydraulic distributor on the tractor.
- Raising REX up and down takes place hydraulically by the actuator. Rotating right-left can be implemented by an actuator or manually.
Tractor hydraulic pump output
18 – 25 l/min
|REX 1.2||REX 1.5|
|Mounting method||The bracket from the front. Category 2|
|Width||1 200 mm||1 500 mm|
|Length||600 – 1200 depending on the bracket version|
|Tractor hydraulic pump output||18 – 25 l/min|
|Weight||55 kgs||77 kgs|