Orchard mower TOSIA is produced version 1.3 m. This model is widespread both in orchards and plantations of berry bushes. Body is made of steel, a cutting element makes up a rotor with blades and a counter blade. This allows the shredding of the cutting mass as well as the branches up to 30 mm diameter.
- It is possible to use the mover by linking to the tractor either symmetrically or by shifting it to the right/left side of the tractor axle (depending on the version).
- Cutting height is regulated by a back supporting shaft and the hydraulic tractor’s lift.
1 300 mm
Min. 20 mm
1 700 mm
|Mounting method||Three-point linkage from the back. Category 1|
|Drive||From the tractor PTO by articulated telescopic shaft and angular gear|
|PTO rotation||540 turns / min (left/right)|
|Slope mowing area||12º|
|Working unit||The rotor with replaceable blades|
|Number of replaceable blades||4|
|Number of replaceable counter-blades||1|
|Cooperating tractor||15 kW|
|Cutting Height||Min. 20 mm|
|Mowing height regulation||Manual by supporting wheel and the tractor’s hydraulic lift|
|Working speed||4 – 12 km/h|
|Working width||1 300 mm|
|Width||1 390 mm|
|Length||1 700 mm|
|WeightTOSIA karta produktu RUS TOSIA Product Card||120 kgs|